Optus Modem Login

Optus gateway allows you to change WiFi password, Network Name (SSID), and default modem settings at http://10.1.1.1 or http://192.168.0.1.

10.1.1.1 Login

192.168.0.1 Login

Select your modem:

• Optus Ultra WiFi (Gen 2) modem
• Sagemcom
• Netgear
• Optus 5G Wireless Modem
• Other Optus DSL Modems

How to login to Optus modem?

Note: The default Router IP address, Username, and Password are printed on a sticker on the underside or back of your modem.

Optus Ultra WiFi (Gen 2) modem

1. Open a browser and type 10.1.1.1 in the address bar.
2. Enter the password located on the bottom of your modem in the “password” field.
3. Select Setup and Configuration > WiFi.
   
4. Enter the Wi-Fi Network Name in the WiFi network name field.
5. Enter the Wi-Fi Password in the WiFi Password field.
6. Click Save and Apply.

Sagemcom

Supported models: Sagem F@st 1201, Sagem F@st 3864, and Sagemcom 3864V3 OP / 3864V3 AC.

1. Open a browser and type 192.168.0.1 in the address bar. For Sagem F@st 1201, the default IP address is 10.1.1.1.
2. Enter the Username: optus and Password and click Login. The Optus login password is printed on a sticker on the back of the modem.
3. Select Setup and Configuration > WiFi.
   
4. Enter the Wi-Fi Network Name in the WiFi network name field.
5. Enter the Wi-Fi Password in the WiFi Password field.
6. Click Save and Apply.

Netgear

Supported models: Netgear DGN220 and DG834.

1. Open a browser and type 10.1.1.1 in the address bar.
2. Enter the User name: admin and Password: password (if required) and click Login.
3. Click on Wireless or Wireless Settings.
   
4. Enter Wi-Fi Network Name in the Name (SSID) field.
5. Enter the Wi-Fi Password in the Password (Network Key) or Pre-Shared Key field.
6. Click Apply to save.

Optus 5G Wireless Modem

1. Open a browser and type the gateway address in the address bar. The admin IP is printed on the back of your modem.
2. Click on Network > 2.4GHz > Configure SSID 1. To configure the 5GHz network, select 5GHz from the menu and click on Configure SSID 5
   
3. Enter the Wi-Fi Network Name in the SSID Name field.
   
4. Enter the Wi-Fi Password in the WPA Key field.
5. Click Save changes.

Other Optus DSL Modems

1. Open a browser and type 192.168.8.1 in the address bar.
2. Enter the default Username: admin and Password: password (if required) and click Log In.
3. Go to the Wireless or Wi-Fi Settings menu.
4. Enter the Wi-Fi Network Name in the Wi-Fi Name or SSID field.
5. Enter the Wi-Fi Password in the Wi-Fi Password/Pre-Shared Key/Passphrase field.
6. Click Save.