Cisco Meraki Router Login

Cisco Meraki web-based dashboard allows you to change WiFi password, Network Name (SSID), and default access point settings at http://my.meraki.com/.

My.meraki.com Login

How to login to Cisco Meraki router?

1. Open a browser and type http://my.meraki.com in the address bar.
2. Enter the Username and Password and click Login.
3. You will be logged in to the Cisco Meraki dashboard.

Note: If my.meraki.com methods fails, you can access the local status page through device’s LAN IP. To view the hardware IP address, open Meraki Go app > Hardware > LAN IP.

The Cisco Meraki Device Local Status Page login credentials will be either of:

1. No password (default): Use the AP’s serial number, with hyphen included (e.g. QXXX-XXXX-XXXX) as the username and leave the password field blank.
2. If password is set in the app: Use “admin” as the username and the configured password in the app.

The serial number (S/N) is printed on the bottom of the device.

If the local password doesn’t work, try clearing your browser’s cache or perform a factory reset of the device.

How to change Cisco Meraki Wi-Fi Password and Network Name?

1. Log in to the Cisco Meraki Dashboard.
2. Navigate to Wireless > Configure > SSIDs.
   
3. For the Name section, select rename and enter the Wi-Fi Network Name and click Save Changes.
   
4. Navigate to Wireless > Configure > Access Control.
5. Select the SSID from the SSID drop-down menu.
   
6. Under Network access, select Pre-shared key (PSK).
7. Enter the Wi-Fi Password and click Save Changes.

How to change Local Device Status Page password?

1. Log in to the Cisco Meraki Dashboard.
2. Navigate to Network-wide > Configure > General > Device configuration.
   
3. Under Local credentials, enter the Password.
   
4. Click Save Changes.